Please look at pictures below, which were pictures I captured from a bondage video. A metal rod was put into the cuff and then it gets hammered to close. There is no padlock.... I'd like to know where I can buy cuffs like this? And in that case, how I can remove the cuffs if I want??
where to buy cuffs like this?
Re: where to buy cuffs like this?
I have seen the video my self. Almost any metal cuff would do, but instead of a pad lock,
you use a bolt or rod and rivet the cuff closed.
To remove, you will need a chisel and a hammer or a grinder or cut off saw.
That you might need help with.
Rae.
you use a bolt or rod and rivet the cuff closed.
To remove, you will need a chisel and a hammer or a grinder or cut off saw.
That you might need help with.
Rae.
Re: where to buy cuffs like this?
These could be made if you had a lathe to bore the hole with a slight taper. Then you could knock the pin in with a little tap but it would still come out relatively easy in the reverse direction.
Very serious looking cuffs....
Very serious looking cuffs....