Milking machine

[SelfboundGuy]

Oh wow Stacey - great pictures!!Not at all disagreeable to me. Now you've given me some ideas on how I can use my workbench myself.Thank you for posting!

[Housebound]

Hmmm! New use for a Workmate. I wonder when the next  B&Q sale is ?

[w.campinas]

I don´t know if this exactly what you want, but there is also the Robojac. http://www.funwaysmarketing.com/PRODUCT ... ndard.htmI saw a video at SeriousImages (www.seriousimages.com) and it looks very, very good!!The video is of a set called "Rubbert meets the Robo Jac". Thing is wild!!! Cheers, W

[jjj333]

Hi dixiewrecked,After studying your pulsator milking system, it got me thinking about about am even simpler and more economical solution:Using my old Electrolux vacuum cleaner with two air-regulated hoses and a solenoid operated valve.Construction:1) The vacuum cleaner will be speed controlled and enclosed to dampen the noise. I might get the noise down to the level I once applied to air-power an accordion (!) All depends how much vacuum force is needed.2) One hose with a manually regulated valve goes to the end of the receiver to maintain a low level vacuum (or slight sucking, to keep the receiver from falling off the penis shaft).3) The second hose with a manually regulated valve, a T piece hose tubing (with a solenoid operated valve on ones side to allow atmospheric air to enter), goes to the side entrance of the receiver tube. Operation:Thus, when the solenoid valve opens the vacuum from the side entrance of receiver is removed and liner contracts, pushing the penis out and when the solenoid valve closes the liner expands, pulling the penis in.The solenoid valve's opening and closing time and frequency is then simply controlled via a basic 555 timer circuit.  That's all there's to it... or did I miss something? Thx in advance for your improvement suggestions etc.     jjj3332012-03-19 10:37:49

[happily_locked]

When I was in the 6th or 7th grade, I used to remove the hose from our vacuum cleaner and insert my penis with it running. A little adjustment of the exact position would lead to massive stimulation, causing an orgasm in much less than a minute. Occasionally, I would continue after one orgasm, and have another and another in a very short time.
My penis would then tingle for hours afterwards.
I once had six orgasms in about a half hour.

[jjj333]

Yes, I think most of us healthy boys enjoyed similar adventures.      The thing is, once you get into your 70-ies you'll need something truly effective to enjoy more of the same and at the same time keep your prostate healthy.  Yesterday, I did some trials on my (above described project) with the vacuum cleaner: It developed enough sucking force, but I was unable to get it moving backwards. One solution would be to enclose the blower part of the vacuum cleaner motor and solenoid switch controlled and regulated suck & blow air flow only to the side entrance of the receiver. Weird... for with my other Venus2000 style project, using a Dodge window wiper motor, driving a toilet plunger, I got the opposite scenario: not getting enough suction! Yet, it's to blame on the plunger, which developed cracks.Thus, now I'm giving the latter project another go, in that I swap the plunger for a big air mattress inflator pump. That will hopefully provide enough suction. If this pump fails, I'll have to to make my own diaphragm pump (as described) or buy a pneumatic air cylinder pump. The question there will be: how many mm3 will I need. It got to be one of 100mm Ø,  because most of them are pretty small and long; unsuitable to be cranked. As you see, I'm going to get there in one way or another... without paying $1200 incl. shipping, plus 30% custom duty to Chile, where I live.jjj3332012-03-22 11:13:06

[jjj333]

After many frustrating attempts to build a Venus2000 replica for less the $50, I finally succeeded with a totally new concept, offering you to build it for around $20.                                       Here's how I built my "Venus20":1) use an old vacuum cleaner motor.2) cap its upper and lower sides so, that you'll end up with a suction and blower tube.3) then make the receiver hose swap these 2 tubes!That's all there's too it,  folks!  :)Of course you can and should control/ balance the suction and blower sides strength and hose swap speed.If you need more details and personal advice, send me $7 to my PayPal account so that I can recuperate my $200 research costs and spend time advising you! Why should you get it all free and I have to butter?  Fair enough, am I not? See video : http://www.mediafire.com/?bsj8nkvbv7qt23g

[OverMilked]

Hi All,
First time poster ... to any forum, so be nice if I am out of line in any way. I picked this forum and thread because it seemed the most on topic of all the ones on the adapted milker subject. I am currently building the Surge Milker type JO device. I have learned a lot, and want to impart that to anyone else that might be interested. Of course, if any of this you know to be incorrect, or even believe to be incorrect, please reply for all, including me, to learn from. Also if you have built one, please list the parts you used, where you got them and the approx cost. If you got here looking for information, please read the follow up posts, just in case someone points out any mistakes.

The basic milker is a vacuum pump/regulator, Surge tank, pulser, and receiver. I'll cover what I know in this order.

1. Vacuum pump/regulator. The Surge tank is made for four teets on a cow, but we only need one. For cows, they need the pump to be able to pull 4-6 cfm. I assume one cfm would be okay, but until someone says otherwise, I'd recommend at least 2 cfm. There are two important figures on a pump, the max PSI, and the cfm. The cfm (Cubic Feet per minute) regards how much air the pump can move, and drops as the vacuum approaches the max PSI. The regulator drops the PSI down to a safe level. The other forums recommend Gast pumps, and the cheapest Gast DOA type provides only 1 cfm. The only exception I could find was the doa-107-fb. It pulls almost 2, and drops to 1 cfm as vacuum increases. The Rotary Vane Vacuum Pumps that have oil have the right cfm rate, but I read they smoke a little, so I decided against them. The DAA type Gast pumps supports twice the vacuum as the DOA. You have to have a vacuum pressure control, or the device would not be safe. I understand that 5-7 PSI vacuum, is the max, these pumps support 30 PSI and up, so again, you need a regulator. I opted for the Ohmeda 200 Continuous Vacuum Regulator.

2. Surge Tank. "Surge" is the type of tank made by the Babson Bothers many years ago, and has become generic name used for all the automatic bucket type milkers now. It is big, heavy, and it is the base you need. Hopefully someone will come up with a smaller substitute someday, but I digress. The important thing to look for in a surge tank is that it has no holes, has a lid, and that the lid has the "C" type of vacuum connector for the pulser. The S type looks circular, with a notch cut out, it looks like a C, but don't let that fool you. The C type looks like a circle that has been filed down on opposite sides and more resembles a T. The gasket needs to be good between the tank and the lid, but they are available.

3. Pulser. This is the thing that makes it suck-release, suck-release as the name might imply. The original pulser is no longer made, and people complain they need to be rebuilt, and constantly adjusted. If you watch a video and hear the click-click-click, when the receiver is moving, that is an original pulser in action. The alternative is the Interpuls pulsator and it requires an additional adapter so it will fit past the handle. The downside on the Interpuls has the speed adjustment that requires an allen wrench to adjust. I'm not sure if it makes the same sound yet.

4. Receiver. This is the end that you put on your willy. It is called a shell, or claw, or whatever. The biggest one for cows is a C shell as far as I can tell. It requires removing the rubber inside and replacing it with a bicycle inner-tube, and adapt it to work. You can build your own, or buy them already made for other similar devices. Not all work with both vacuums, but should still work with the pulsed side. Robojac and Venus 2000 uses only one. SeriousKit uses both, and it is based on the same milker.

Safety. No one wants to go to the hospital after being skinned (ouch!). If you think it is ready, start with a low pressure, test on your thumb, and be sure you have a simple method to release pressure. Even attaching two additional hoses to the tank and the pulser, that require you to hold your thumb on both for the pressure to build, at least allows an quick escape. Remember regulators fail, and this could do a lot of damage, be mindful.

That seems like a lot bigger than a single post should be.
I'll post related links in the next post.
Thanks.

[OverMilked]

Related links.

Buying parts
--------------------------------------------------------------
Vacuum pump.
Ebay. Any pump that can deliver 2cfm or more will do. Make sure you buy 120v if in the US, or whatever if you are not.
Harbor Freight also sells a $99 oil filled 2.5cfm vacuum pump.
http://www.harborfreight.com/catalogsea ... acuum+Pump

Surge tank and pulser
Ebay's the cheapest way to go.

Hamby Dairy has a good selection.
http://hambydairysupply.com/xcart/home.php?cat=248

Parts depot is generally cheaper.
http://www.partsdeptonline.com/Surge-Be ... oducts/62/

Receivers: Build your own or ...
Robojac
http://www.funwaysmarketing.com/PRODUCTS/sleeves.htm

Venus 2000
http://www.sybian.com/venus/order.html

SeriousKit - They also sell the tank, pulser and hoses. Good pictures.
http://www.seriouskit.com/site1/Milking_Machines.html

Male Milking Machine
http://www.malemilkingmachine.com/buy.m ... chine..php
--------------------------------------------------------------
Some links to other forums and web pages about Surge Milkers.
Milker for Dairy Goats
http://www.freewebs.com/cottoneyeddoes/ ... milker.htm

One poster gave a lot of info in this forum.
http://chastitymansion.com/forums/threa ... toys.1216/
--------------------------------------------------------------
Videos
Surge Milking Machine with Surge receiver
http://www.xtube.com/watch.php?v=oTKuV-J871-

Surge Milker Machine with Robojac receiver
http://www.xtube.com/watch.php?v=SrwhL-G164-

Surge Milker Machine with Venus 2000 receiver
http://www.xtube.com/watch.php?v=sS6Ux-C472-

Surge Milker Machine with Serious kit receiver
http://www.xtube.com/watch.php?v=2ZrUs-G580-
--------------------------------------------------------------
Stories
The Milking Machine
http://www.literotica.com/s/the-milking-machine

Hunger
http://www.hentai-foundry.com/stories/u ... r-4/Hunger

The Milking of Darian
http://www.milovana.com/forum/viewtopic.php?f=18&t=4322
--------------------------------------------------------------

[OverMilked]

Here's another link to a built milker. A very good description. including the receivers.
http://tribes.tribe.net/male_milking_fo ... f1396fa47f

After I have a working model, I'll post the following information in this format.
Part ---- Source ---- Approx cost ---- Comment

For example
Part ---- Source ---- Approx cost w/sh ---- Comment
Tank Ebay $70 This could be replaced with anything the lid would fit on.
L80 Ebay $50 Interpuls replacement for the Surge pulser

Thanks.

[Zuxo]

Hi Folks,

Has anyone on the forum constructed a Milking Machine without it costing a fortune yet?

I am planning to build one and I like the Idea of an electronic timer to control the pulses so any advice would be welcome.

A Milking Machine pulsator is fairly expensive so I am looking to construct one using a different method.

Zuxo

[happily_locked]

I was browsing, and ran across my earlier post. I am now locked into my jailbird with no way out, and wanting very much to have an orgasm. I froze a handcuff key and a couple of lock keys into a water bottle. While it was freezing, I discovered a way to sit with my back against a chair so that a canister-type vacuum cleaner could be placed against my chastity. I was very eager for the water to freeze, and gave it an hour after it looked frozen, to be sure. I removed all of my clothing, inserted a butt plug, got some rope, locks, and chains. I hung the bottle of ice so the keys would fall when the ice melted, and plugged the vacuum cleaner into a wall timer, set to start in 15-30 minutes and then run for an hour. I then tied my ankles together around the vacuum cleaner, and used several ropes to insure that the vacuum cleaner would stay on my chastity. Finally, I put clamps onto my nipples, which gets me very aroused, even in chastity, then handcuffed my wrists together behind my back, so my arms held me to the chair. I was helpless, and eager for the vacuum cleaner to start. It did, and I was able to wiggle around enough to get a very good vibration of my foreskin going. I came twice before my key holder came home and discovered me. She took away the ice with the keys, and removed the tab from the timer which would have made it turn off. She left me there for three hours. I had many orgasms, and am now quite sore, yet still locked up. My key holder has said she may do this to me again, if I do not please her.
I wonder what I am now in for, and very horny in spite of hurting.

[milman]

I tried the milking machine and was pleasantly surprised.
I went all out for the full stimulation so attached on to each nipple and one to my dick.
The pain and first time use made a huge orgasm that was immeasurable and my GF was helping me.
She was turned on by me doing it so as I was cumming, she grabbed my balls and squeezed them very hard to help the machine.
It worked and what would have normally been a painful grab by her strong hands sent me into convulsions of orgasmic wave after wave.
She left me shaking there for a full 5 minutes as we had agreed in advance but once done, it felt like my balls were drained, nipples poking out and dick still hard as a rock.
Maybe not for everyone if alone but the combination of her grabbing my nuts very hard and not letting up until they were exhausted and the suction on my nipples was both painful and erotic.
I am interested in what you find when you reply to us about your experience.
Make sure have a safe word and switch under the control of someone else since once you start, you loose virtually all control of your dick, nuts and hand coordination.
Reminds me of when guys get tazered how they loose all control of motor functions but now add the sexual wave of orgasms into the mix. OMG
I will try again but next time, I want to video it from several angles so I can share it with you all.