Help prepping bed for restraints.

Don't feel like searching for the answer, check here first!

Help prepping bed for restraints.

Unread postby KinkMaster » Sat Jun 06, 2015 7:23 pm

My wife and I are diving into some bondage. She is really dominant in our day to day life but we are reversing roles in the bed where she will be my sub. I have all my gear to get started and purchased ring anchors I want to screw into the frame of our bed.
I have 8 anchors. Where should I place them? These anchors with be used for the tethers I will use to restrain my wife in the bed. I am looking for anchor locations that will provide the best positional variations,
Any recommendations?
A diagram would be helpful.
KinkMaster
Unfettered Newbie
 
Posts: 1
Joined: Sat Jun 06, 2015 7:13 pm

Re: Help prepping bed for restraints.

Unread postby Impulsed » Wed Jun 10, 2015 8:49 am

If you have 8 anchors I'd say put one on each corner of the bed.

Then put the remaining ones in the middle of each side of the bed. It fairly balances out all of your anchor points.

Alternatively you could space them out so you have 4 on each side but it won't give you as much variation.
Impulsed
Chair Bound
 
Posts: 65
Joined: Sat Jun 20, 2009 1:56 am
Location: North East UK

Re: Help prepping bed for restraints.

Unread postby SergioUK » Thu Jun 18, 2015 10:13 am

You'd probably find it useful to do some experimenting. For instance for a spreadeagle with attachment points that are lower than the surface of the bed the ropes will either go around the side or the top edge of the bed which makes for different restriction. You might want to be able to restrain wrists and ankles each in both ways - to top and sides for maximum immobility, so perhaps three points each side and one each top and bottom. If you could stretch to another four points it would be a lot more versatile, but experiment before you start drilling.
SergioUK
Chair Bound
 
Posts: 56
Joined: Tue Mar 04, 2014 7:03 pm
Location: London, UK


Return to Answer Archive

Who is online

Users browsing this forum: No registered users and 1 guest

  • Help support the forum by visiting our sponsors below