Slippery clamps

Don't feel like searching for the answer, check here first!

Slippery clamps

Unread postby Cheshire » Tue Nov 24, 2015 7:58 pm

Have one little problem vith my bondage gear. Specifically with nipple clamps.
One of them (with rubber cover looked like this http://ecx.images-amazon.com/images/I/3 ... SX300_.jpg ) first time worked perfectly. But, in one day, covers just get too slippery and they start fall off, and i don't know, how prevent it...
Yes, i can take off rubber part, but those sharped claw are... owwwh... it's very arousing and pleasurable, but also very painful afterward, so i can't wore them too often.
May be i should clean them with something special?
Cheshire
Unfettered Newbie
 
Posts: 2
Joined: Fri Aug 02, 2013 5:01 pm

Re: Slippery clamps

Unread postby Franzia » Wed Nov 25, 2015 2:27 am

I don't know why they usually use those shiny rubber tips, add a bit of perspiration or skin oil and they get even more slippery.

You could bend the jaws slightly for more of a 'tweezer' effect or a use a bit of detergent or soap to wash off any oil. You might also try the naked jaws over a top, as any cloth will lessen the bite.
Franzia
User avatar
Franzia
Hopelessly Suspended
 
Posts: 1299
Joined: Fri Oct 28, 2005 5:21 pm
Location: United States

Re: Slippery clamps

Unread postby d3vious.g3nius » Wed Nov 25, 2015 2:38 pm

Try cleaning them(the clamps and your nips) with rubbing alcohol.
- d.g
"I am not helpless, I'm simply retrained at the moment!"
d3vious.g3nius
Tightly Hogtied
 
Posts: 247
Joined: Sat Jul 28, 2012 2:12 pm
Location: Good ole sunny F L A!

Re: Slippery clamps

Unread postby tiemeupalso » Wed Nov 25, 2015 4:26 pm

AFTER CLEANING THEM TAKE SOME SAND PAPER HOLD OF THEM AND ROUGH THEM UP A BIT.
tiemeupalso
Hopelessly Suspended
 
Posts: 1236
Joined: Thu Oct 13, 2005 3:24 pm
Location: Texas

Re: Slippery clamps

Unread postby Johnr104 » Thu Jan 07, 2016 4:53 am

Get yourself a can of Hollister 7730 medical adhesive (it's a spray can used to adhere silicone breast forms to the body). Just the tinyest dab on your nipple and the clamp won't come off.
Johnr104
Unfettered Newbie
 
Posts: 14
Joined: Mon Nov 14, 2011 5:55 pm

Re: Slippery clamps

Unread postby FatherOfFour » Thu Jan 07, 2016 9:17 am

A - if You want them with both functions (with _and_ without rubber tips) You have to increase friction on the metal part.
- Sand it (the metal part of the jaw) a little bit, and try if it slips or not
- Eventually cover metal jaws (after sanding) with tool-dip, nail-resin or other non-slip surface
- There is a 3M spray with the post-it adhesive. Use it on the jaws (no contact with skin and ould take apart easy)

B - You'll use them only with rubber on: contact cement, any rubber adhesive (careful: poisonous and flammable vapors), leather adhesive, shoe adhesive, etc. on sanded metal jaws and they'll never slip off again

Have fun, keep playing
f4
User avatar
FatherOfFour
Chair Bound
 
Posts: 70
Joined: Thu Nov 26, 2015 7:43 am

Re: Slippery clamps

Unread postby lanad » Tue Jan 26, 2016 10:56 am

You cold try changing the rubber sleeves to a different type, or glue on some harder pads, ouch, god how I love these things.
User avatar
lanad
Tightly Hogtied
 
Posts: 107
Joined: Thu Jan 08, 2015 12:57 pm


Return to Answer Archive

Who is online

Users browsing this forum: No registered users and 1 guest

  • Help support the forum by visiting our sponsors below