Need help id'ing something
-
- Unfettered Newbie
- Posts: 23
- Joined: 13 Mar 2022, 19:49
Need help id'ing something
I saw a video recently that had a tool of torment that I have never seen before. It was shaped like a small sling shot (Y shaped) What appeared to be an electrical cord came out of the bottom of the handle. The two parts of the Y were springy and each had a ball on the far end. It being used on a man who was hand cuffed and laying on his belly. The user of the instrument started off by running the parts of the Y over the victims butt cheeks then up and down the crack of his ass. The victim was protesting in a language that I am unfamiliar with. The user pressed parts of the Y right on the victim anus which produced loud cries. Then he inserted one half of the Y into the victim anus. That produced violent cries of protest. I have never seen anything like this instrument so I don't have a name for it. I'd like to have one. Any ideas what this is?
Re: Need help id'ing something
They call it " The Humbler"
-
- Unfettered Newbie
- Posts: 23
- Joined: 13 Mar 2022, 19:49
Re: Need help id'ing something
I thought the "Humbler" was the curved wood or metal device that clamped around your balls and curved around the back of your legs so you could not stand up without pulling your balls off. I have one of those.
- DarkLizerd
- Hopelessly Suspended
- Posts: 1177
- Joined: 01 Aug 2007, 15:41
- Location: NE New Mexico
Re: Need help id'ing something
Sounds more like a cattle prod.
NOT something to mess around with!
Altho, I think they can be down graded for a less sever shock.
NOT something to mess around with!
Altho, I think they can be down graded for a less sever shock.
All advice is checked, re-checked and verified to be questionable...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
-
- Unfettered Newbie
- Posts: 23
- Joined: 13 Mar 2022, 19:49
Re: Need help id'ing something
Most cattle prods have long handles and are battery powered. The handle on this was perhaps 5 inches long, just palm sized.
- DarkLizerd
- Hopelessly Suspended
- Posts: 1177
- Joined: 01 Aug 2007, 15:41
- Location: NE New Mexico
Re: Need help id'ing something
Taser maybe, something else NOT to take lightly.
All advice is checked, re-checked and verified to be questionable...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
-
- Unfettered Newbie
- Posts: 23
- Joined: 13 Mar 2022, 19:49
Re: Need help id'ing something
No it wasn't a taser. Picture a kids slingshot. A handle with two springy fingers out one end to make a Y shape. Each finger perhaps 3.5 inches long and each had a ball on the end. On the other end of the handle was what appeared to be the power cord.
- DarkLizerd
- Hopelessly Suspended
- Posts: 1177
- Joined: 01 Aug 2007, 15:41
- Location: NE New Mexico
Re: Need help id'ing something
Can you get a screen shot of the object?
That may help more than guesses.
That may help more than guesses.
All advice is checked, re-checked and verified to be questionable...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
-
- Unfettered Newbie
- Posts: 23
- Joined: 13 Mar 2022, 19:49
Re: Need help id'ing something
I'll try to get a small screenshot of one frame of the video and see if I can post it without any copyright violations. Moderators, I will need your help with OK'ing this. I'll try to do this today.
-
- Unfettered Newbie
- Posts: 23
- Joined: 13 Mar 2022, 19:49
Re: Need help id'ing something
I could use some help here. Add an image is looking for an http://image. This a .jpg file on my HD. Dragging the 20KB file into the box gets an error telling me the file is too large. What am I missing here.
-
- Unfettered Newbie
- Posts: 23
- Joined: 13 Mar 2022, 19:49
Re: Need help id'ing something
Trying to post the file as an attachment still tells me (20 KB) is too big
- DarkLizerd
- Hopelessly Suspended
- Posts: 1177
- Joined: 01 Aug 2007, 15:41
- Location: NE New Mexico
Re: Need help id'ing something
You may need to upload it to a file sharing service, like Mega, then share it from there.
All advice is checked, re-checked and verified to be questionable...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
-
- Unfettered Newbie
- Posts: 23
- Joined: 13 Mar 2022, 19:49
Re: Need help id'ing something
How about a link to a bdsmlr.com page. Would that be considered publicly accessible and not violate any copyrights. It would require a login.
-
- Unfettered Newbie
- Posts: 23
- Joined: 13 Mar 2022, 19:49
Re: Need help id'ing something
Here is a link to a video of the device I am trying to ID being used. If it is not OK to post this like then delete this post and let me know. I can't find any other way to show everyone the device I am trying to ID.https://land-of-electro-shocks.bdsmlr.c ... /472755382
-
- Unfettered Newbie
- Posts: 23
- Joined: 13 Mar 2022, 19:49
Re: Need help id'ing something
To see this you will need a login to that website.
- DarkLizerd
- Hopelessly Suspended
- Posts: 1177
- Joined: 01 Aug 2007, 15:41
- Location: NE New Mexico
Re: Need help id'ing something
Try this code: It won't show the picture, but it's better than nothing.
I used Mega in this example. (It's just a picture of a house.)
<img src="your_image_url.xxx">
<img src="https://mega.nz/file/4ipRgLyT#-jgO4GsV7 ... swNNk05tmU">
I used Mega in this example. (It's just a picture of a house.)
<img src="your_image_url.xxx">
<img src="https://mega.nz/file/4ipRgLyT#-jgO4GsV7 ... swNNk05tmU">
All advice is checked, re-checked and verified to be questionable...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
Re: Need help id'ing something
It sounds like a cattle prod to me. This isn't something to play with! However, I believe they may be downgraded for a milder shock.
-
- Unfettered Newbie
- Posts: 23
- Joined: 13 Mar 2022, 19:49
Re: Need help id'ing something
This website is one of the replacements for tumbler after they kicked off all the fun stuff. It's not a cattle prod.